Відео

@@beachbumLifestyle was released through sideshow collectibles. It sold out so secondary market, eBay and Facebook groups are your best bet for him now.

@@danybayor it’s all 1/3 scale. Not overly large on its own. Can’t say exactly the size as I have it in a deep display now. Maybe check P1’s website, should be specs of it on there :)

@Roscoe0583 Yeah, I couldn't find the dcale size on their site. Only details for the larger figure. Thanks though. I'll keep looking around to find the dimensions of it. My place is running out of space, so I'm looking for its size to see how convenient it'll be for mini head busts.

@@danybayor you should be fine, it’s quite compact and easy to find space for it. The pred ones are a lot bulkier.

@@angrydog3782 this is the museum version, the one with the less stiff pose that’s the regular version. If the regular version has 2 different heads than that one is the deluxe version. I have filmed that one also.

@@Roscoe0583 I'm from Brazil, I found the Museum version at a physical store. I'll probably buy this model. Amazing wall behind the Alien.

@@angrydog3782 yes the wall is fantastic, the museum version is far more rare also.

Not sure if the top of my head, all I know is that they are cell batteries. I can check a bit after if you can’t find anything.

I have the statue but don’t know what batteries use for the led of the mask

I still own this. This is made by Sideshow Collectibles. Have to find it in the aftermarket now. EBay or Facebook statue buy sell trade pages.

I prefer the prime 1 big chap as far as design goes but I think the dog alien was perfect and I had absolutely no issues with its construction.

Depends on where you are based. I got this at retail locally for 6k AUD. It’s sold out now but have seen a few already for sale lately for about 4.5-5k US. Then you have to factor in postage for 2 massive boxes.

Hey brother what are your thoughts on the 1/3rd xl line??

I think it will remain king. The new bust is fantastic but I didn’t order as I wasn’t a fan of the base. The new bust will have far many more units and an upcoming anamatronic edition size so more of them out there plus it’s just Arnold. If you want an iconic Bd Arnold showing him and the endo as a terminator this is it at 99 edition size only. The Blitzway isn’t even in the conversation as far as I’m concerned, its an idealised version just like Yulli did with her hot toys DX12.

@@Roscoe0583 Fair point about the base of the new one, not sure what you mean about idealised version?

@@SlickOils well yulli stated in the showcase video that they could not get the look of the silver face prosthetic right so they changed it to a modern look with more blood and a chrome endo deeper under the skin like it should be. So it’s modernised not film accurate just like her dx12. Enterbay got that right, plus there are a few inaccuracies overall with the P1.

@@Roscoe0583 I don’t think there’s much point in making such an expensive statue of a terminator look like Arnold wearing makeup, as in the film due to outdated prosthetics. I preordered the prime 1 platinum, in my opinion it’s one of the best likenesses to date and an upgrade from my DX-13. Having said all of this, I’d have to see each in real life, seeing them on YT is different entirely. I also preordered the P1 T2 endo, and I have their jungle hunter predator on the way. My wife is ecstatic! 🤣

@@SlickOils I do as the prosthetic look is iconic and film accurate by Stan Winston studios. They tried to replicate it but couldn’t so they did their own version in the end. The platinum is great with the minor damage or non damage but I couldn’t justify 5k Australian for a 1/3 human which isn’t that big. May pick them up later cheaper in the aftermarket but I’ve committed to all the 1/3 preds which ain’t cheap.

Yes

@@Roscoe0583 cool, I just ordered mine as it was 10% off plus £500 for shipping/tax, so I paid £2600 for this version with the Billy’s skull and spine hand, which is the cheapest I found it for. Some joker on eBay is asking over £4K! The down side is that its being sent by ship freight, so it’ll take two months to get to the uk. Still, gives me time to sell some hot toys and redecorate my mancave. Nice channel, I subbed.

Yes they were, far easier to swing. These ones you can barely swing with one hand, far too heavy.

I see, you must have the reissue they’ve just released. On mine the cover is magnetised and may need a plastic tool to pry the lid off a bit.

@@Roscoe0583 what type of plastic tool? I used a tooth pick to get the cover off and no luck. I am not trying to damage the paint finish

@@maulssaber maybe a bit of paint may have caused it to stick a bit, could try a flat screwdriver with a rubber band stretched around it, hopefully that will grip and avoid scratching.

@@Roscoe0583 update I got the b battery cover off and it was held in with a strong magnet, I made a pull tab for the cover so when the batteries run low it will be easier to change them out.

@@maulssaber awesome good idea, I think I remember mine was a pain to remove as well.

Yes I did, also did a video once it arrived 😊

There is a certain angle you need to insert it, they can be stubborn. Had a lot of friends with the same issue. Make sure the holes are completely drilled out. My stump one wasn’t. Guide the front foot on as much as you can and the back should eventually line up and drop in as it gets lower. Heat usually work but this guy is thick, don’t think it will flex much if you do use a hair drier.

@@Roscoe0583 I can put the peg of one foot in a hole, but then the other one won't fit. Then it looks like the legs aren't far enough apart. Or one peg/hole is at the wrong place. I tried it with angle, but that doesn't worked and I already broke the tip of one nail. Oh I hate Prime 1 🤬

@@sedave2756 could be that it’s changed shape being in the box for so long but I had numerous people ask for help with the very same issue as yours and they eventually got it in. Get that front pin in the front foot as much as you can and see how far off the other is.

@@Roscoe0583 I thought that too, but then I read in an online forum that he is too big and it won't work. But what do you think, if I let him rest for 24 hours in my living room (the temperature there is 22 degrees Celsius) that will be enough and work? Hard to say how much it is off, at least 5 millimeter, maybe more.

I've waited now 24 hours, but it still doesn't fit 😕

I think mine sits flush and opens ok, but a lot of these are tight from new, especially the battery openings on the full statue, maybe just too much paint used and once worn thin you should have it open easier.

Agree 100%, it’s still good to see new preds but yes the films are definitely lacking since P2.

I know quite a few people waiting on Spec, hopefully not too long to go now for you.

Yeah it wasn’t the usual quality bodies you’d get from hot toys but given how cheap it was at the time and they were a new company, almost at the point of custom i let it slide and it displayed fine. But I agree they should have replaced the bodies when promised.

Yes i do, I’ve never sold a predator statue.

Just the swords themselves unfortunately, I think the Knock offs come with a plaque.

Modern Australian house, slim high windows above them.